Re: Coil form

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Brian by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ka1bbg-at-webryders-dot-net>

Well, thats a good question, but most use green or white pvc drain pipe.
easily obtained from pool installers, plumbers, or construction sites. Marc
also has and was selling fibreglass tanks from water softeners. Many also
use sonatube (concrete form) or cardboard tubes. Most use oil based
polyurethane to seal and hold the wire, or 2 part epoxy...cul brian f.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, August 26, 2002 9:14 PM
Subject: Coil form


> Original poster: "Calvin Patrick by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <linhacktux-at-wycol-dot-com>
>
> What's the best material to use for a secondary form?
>