Re: OLTC update - winding the secondary

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimlux-at-earthlink-dot-net>

Standard two bolt pillow blocks work well.. 

Tesla list wrote:
> 
> Original poster: "Lau, Gary by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<Gary.Lau-at-hp-dot-com>
> 
> I used a very similar jig, also with VSR drill and Variac.  The problem I
> had was finding a support "bearing" for the threaded rod to pass through
> that doesn't engage the threads.
> 
> Regards, Gary Lau
> MA, USA
>