[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Primary radius inside secondary radius/ elevated secondary?



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <FutureT-at-aol-dot-com>

In a message dated 8/11/02 12:45:18 PM Eastern Daylight Time, tesla-at-pupman-dot-com
writes:

Yes,  I've done that often.

John


>
> My planned solution is to raise the secondary ABOVE the primary on insulated
> supports -so the primary radius will in effect be within the radius of the
> secondary. Is this OK?
>
>