Re: a/c switches and Control Box Enclosures

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Kidd6488-at-aol-dot-com>

Hi,
I'm sure some of us would like to see the schematic for this, If you have it.

Thanks,
---------------------------------------
Jonathon Reinhart
hot-streamer-dot-com/jonathon

>
> I use the same box.  Here is a picture of my box.  It features the
> following:
>
> http://www.spacecatlighting-dot-com/ctc1_ctrlbox01.jpg
>
> - 5A Circuit Breaker (used as switch as well) for my Synchronous Rotary
> Spark Gap
> - 15A Circuit Breaker to power my NST Mains
> - Key Lock Safety Circuit (prevents unauthorize use)
> - 40A 240VAC Latch Relay Circuit
> - Logic to prevent NST Mains power to be energized unless SRSG is running.
> Actually, the NST Mains power will not be
>    able to be enabled unless the circuit breaker for the SRSG is in the "ON"
> position.  This is just a little extra back-up so one doesn't power up the
> NST Mains and blow the cap, but the safety gaps on the NST filter and the
> SRSG assembly should also prevent damage.
>
> -Psycho Dan