Calculation of PFC Capacitors using LTR Capacitor

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Mccauley, Daniel H by way of Terry Fritz <twftesla-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>



Here is my current design:
15kV / 60mA NST
Tank Capacitor - 0.0275uF
using SRSG

If I use WINTESLA, the PFC Capacitors should be approximately 165uF assuming
a tank capacitance of 0.0106uF.

However, when using my LTR capacitance value of 0.0275uF, how does this
affect this calculation.

I guess in a properly built / properly tuned SRSG, then the system should
work as if the NST is still charging up a 
0.0106uF???

What are your thoughts.

Thanks again.

Dan