Re: New Coil/RSG Annoyance

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Marry Krutsch by way of Terry Fritz <twftesla-at-qwest-dot-net>" <u236-at-earthlink-dot-net>



Tesla list wrote:
> 
> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<Esondrmn-at-aol-dot-com>
> 
> In a message dated 4/17/02 5:22:57 PM Pacific Daylight Time, tesla-at-pupman-dot-com
> writes:

> 
> Winston,
> 
> What rpm motor are you using, what is the H.P. rating, what size is the
rotor,
> how many electrodes on the rotor, how many stationary electrodes?  Are
you sure
> is locks into the line frequency and is synchronous?
> 
> Ed Sonderman

Hi Mr. Sonderman, All.

	My motor is a 3600 RPM Dayton 3/4 HP job.  The rotor is 10" in
diameter, and has eight holes in it, four of which were used at the time
for (attempted) 240 BPS operation.  I am pretty sure that the motor is
phase locking.  I can't tell for sure, since I don't have a good strobe,
but it worked OK (not great) on my big coil.

Thanks,
Winston