[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: trioid (spelling?)



Original poster: "Gregory Hunter by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ghunter31014-at-yahoo-dot-com>

You're trying to spell "toroid". WalMart sells 9"
sheet metal pie pans for about $2 a pair. Two of these
glued or riveted together back to back make a cheap,
sturdy wheelrim-like assembly. This can be wound with
4" aluminum flex duct from Lowe's or Home Depot to
make a neat toroid about 17" in diameter. A bungee
cord inside the flex duct will hold it snug against
the pie pan "wheelrim".  A bead of hot glue on each
side will keep things tight after you've joined the
ends of the flex duct together with aluminum tape.
I've used a toroid like this at powers from 540W up to
7500W, and gotten good results all around.

Cheers,

Greg
http://hot-streamer-dot-com/greg

--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <Beans45601-at-aol-dot-com>
> 
> I have finally gotten around to winding my
> secondary.... wow, thats fun! What
> can i use for a trioid, i was thinking some stiff
> dryer duct?
> Thanks
> -Adam
> 
>