[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

coupling fix



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Kidd6488-at-aol-dot-com>

Hello, 
To fix my coupling problem, I am going to cut out the table my secondary coil
attatches to, and put a plate underneath the table. 
Like this:

           |   |
-----------|   |------------
         

My question is, What is the highest up on the secondary that my primary will
ever have to be?

Current setup:
6" sec.
2" spacing between pri. & sec.

Hopefully, this will bring up my spark legnths closer to the 40's....

Thank you,
---------------------------------------
Jonathon Reinhart
hot-streamer-dot-com/jonathon