Re: varnish with guts ?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Alexander Rice by way of Terry Fritz <twftesla-at-qwest-dot-net>" <alex-at-rices.myip-dot-org>

Chris,
	You wouldnt have a hope in hades of 
getting the coil of wire off the former again 
with no draft angle, if you really want to try 
this (and i recommend against it because i 
dont think it will ever be truly satisfactory) 
you need to make a tapered former, polish it 
and coat it with release agent. As fas as 
somethng to impregnate it with goes i cant 
really think of anything. If pipe is expensive 
(what size coild are you building - can't you 
use ordinary drainpipe for £10 for 3m) then 
you could always make a plexi frame to wind on 
- although the result would be more prone to 
damage.

regards 

alex