[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: tpi

To: tesla-at-pupman-dot-com
Subject: Re: tpi
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 04 Apr 2002 08:24:23 -0700
Resent-Date: Thu, 4 Apr 2002 08:43:09 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <CCFh0.A.kfH.SRHr8-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Parpp807-at-aol-dot-com>

In a message dated 4/4/02 12:32:14 AM Central Standard Time, tesla-at-pupman-dot-com 
writes:

>  Frank,

Not from anywhere in my cranial void but rather from the wire tables:

single build # 22 is 0.0266 inch

Cheers,
Ralph Zekelman

>>Does anyone off the top of there head know how many turns per inch i can get
>>oput of standard biuld 22 awg magnet wire? Thanx

Prev by Date: Re: tpi
Next by Date: Re: Coil ratio; width versus length.
Prev by thread: Re: tpi
Next by thread: Re: tpi
Index(es):
- Date
- Thread