Re: Newbie Design help

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Patrick Bloofon by way of Terry Fritz <twftesla-at-qwest-dot-net>" <transactoid-at-home-dot-com>

But if I over-build, will that make my coil less effecient at the single-NST
power?


> >  So how does all this sound? Obviously, I want to optimize my design for
the
> >  given NST. I'd like it to be upgradable too, as I have lots of NSTs I
> could
> > run together.
>
> Since you want the coil to be upgradable, then it must be built
> large.  I would make the secondary 6" x 30" or so, then you can
> raise the input power and get 70" sparks or so with adequate
> power, even more if you raise the power even more, and run
> it at a higher breakrate.
>
> Good luck,
> John
>
> >
> >  Thanks a lot!
> >  Patrick
>
>
>