Re: Secondary question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Jeff,

You should not mix different types of coatings since the chemicals in them
may not be compatible.  However, once it is all dry, sanded, or whatever,
the coil should work fine regardless.

Cheers,

	Terry


At 08:22 AM 9/17/2001 -0600, you wrote:
>I wound my secondary then sealed it with Minwax polyurethane.  I didn't
>think there were enough coats on it so for some strange reason bought some
>different spray varnish to add more coats.  This was a disaster.  The stuff
>bubbled up all over the coil.  Being somewhat of a perfectionist, I tried to
>remove the spray-on stuff and coat it with more Minwax.  I sanded the wound
>coil with care but some windings got the insulation sanded off.  I thought
>it would be ok as long as there's no short.  Am I right?  Please tell me I'm
>right....  It's now encased in a thick polyurethane shell.
>
>Jeff J.
>
>
>