Re: Construction techniques (attaching toroid and secondary coil)

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <CTCDW-at-aol-dot-com>

Brett, 

I did indeed drill a hole in the BASE of the secondary endcap, to put the 1/2"
x 3" nylon bolt (that I got at Home Depot) through. As far as the toroid, I had
a porcelain insulator that had mounting screws and a bolt for the toroid to
mount on. At neither end, however did the wire or HV actualy enter the coil
form. 

Chris W 

http://hometown.aol-dot-com/ctcdw/