[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Wire question

To: tesla-at-pupman-dot-com
Subject: Wire question
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Wed, 10 Oct 2001 16:22:35 -0600
Resent-Date: Wed, 10 Oct 2001 16:42:15 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <Db9tkD.A.UuB.w6Mx7-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "mbarbani by way of Terry Fritz <twftesla-at-qwest-dot-net>" <mbarbani-at-yahoo-dot-com>

Hi list,I currently have a 4.5" x 23" secondary wound with #22 ga. wire,
and it performs well. I am considering winding another secondary with same
dimensions but using #24 ga. wire instead..Will there be any advantage or
disadvantage here? The number of turns will increase thereby affecting
inductance, but will spark length be affected? As always your ideas are
appreciated.d.Marc B.B.CA USA

Prev by Date: RE: triggered gap for MOT?
Next by Date: Re: tube coils
Prev by thread: Re: Silly question?
Next by thread: Re: Wire question
Index(es):
- Date
- Thread