RE: Secondary Forms

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Ted Rosenberg by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Ted.Rosenberg-at-radioshack-dot-com>

CJ:
I just got through building my new coil using a 6.25 OD PVC about 40 inches
long. I regret to say that my local Lowes and HD had no "6" in stock.
I wound up finding a Farm Irrigatation company. They have everything in
sizes to 12" or so. Looks like a huge lumber yard except its white, black
and green PVC. I bought 10 feet and for an extra couple of dollars, they cut
that into a 4 and a 6 footer.
Don't know where you live (stix or city) but perhaps there is such an
operation nearby.

Safety First

Ted

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Thursday, October 04, 2001 9:29 AM
To: tesla-at-pupman-dot-com
Subject: Secondary Forms


Original poster: "CJ Moore by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<wizard1234-at-home-dot-com>

I have been having a hard time trying to get an good form for my secondary.
I am looking for a 6 inch by 40 inch or so pipe, and I don't want to have to
buy a huge 10 foot or 20 foot segment. I know of quite a few locations.

1. Local home improvement, home depot lows etc...
2. Plumbing supplies store
3. Local water company (have to know somebody)
4. Construction sites (usually not a law abiding act)
that's all I can think of right now ....

Basically I was just wondering if anyone could provide any other sources
were you can somewhat small pieces of pipes.


Thanks,

CJ