Re: Attaching Toroid to Secondary

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "S & J Young by way of Terry Fritz <twftesla-at-qwest-dot-net>" <youngs-at-konnections-dot-net>

Patrick,

I use a nylon bolt to attach a 1" PVC cap to my secondary end disk.  Then
another PVC cap bolted to the toroid center disk.  Toroid height adjustment
is then a simple matter of how long a piece of 1" PVC pipe is between the
PVC caps.
--Steve

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, November 26, 2001 8:52 PM
Subject: Attaching Toroid to Secondary


> Original poster: "Patrick Bloofon by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <transactoid-at-home-dot-com>
>
> I'm thinking of heating a nut and melting it right into my plastic end cap
> (being careful to not break through it, of course). Then I can attach a
bolt to
> my toroid and screw it right into the nut.
>
> The problem I see with this is that the height of the toroid won't be
> adustable, and I'm not sure how I'd attach the secondary wire.
>
> How do all you guys attach your toroids to your secondaries?
>
> Thanks,
> Patrick.
>
>
>
>
>