Re: Ballast

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jason Petrou by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jasonp-at-btinternet-dot-com>

Try it and see :) it sounds chunky enough. maybee you could use it as a
welder if all else fails :)

remember to short the secondary windings before you try it... i would try
both the HV and LV side to see how much they ballast to :)

best R,
Jason
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, November 12, 2001 6:35 PM
Subject: Re: Ballast


> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<PsychoticMinds1-at-aol-dot-com>
>
>
>
>        Hi all
>
>                    I have a transformer from a profesional car battery
> transformer the transformer is capable of running 100 amps at around 14
volts
> lv side and 120 hv side  Would this make a good ballast? the thing must
weigh
> 50 pounds and is about a foot  squared.
>
>