[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: spun toroids



Original poster: "Jim DeLillo by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jimdel-at-bellatlantic-dot-net>

Michael,

Try here.  I did a bulk toroid buy a while back.
The quality is EXCELLENT.
Be prepared to spend $$$ for short runs though.  The price gets very
reasonable for quantities.
We did 50 pieces for the bulk buy.

Make sure you get the 6061 aluminum, the 1100 is softer and tends to
dent more easily.
Also ask for extra packaging material, especially overseas, as some had
to be replaced due to
dents in shipping.


Mark R. Pratt, V.P.
> > Phone 413/445-5632
> > Fax 413/499-0614
> > EMAIL owlspin-at-vgernet-dot-net
> > WEB www.owlandergren-dot-com
> > Thank You
> >
>
> > > OWLandergren wrote:
> > > >
> > > > Jim:
> > > > We have over 75 different toroid sizes. Since we are a job shop, we
> > > > manufacture parts to order, therefore the toroids are not in inventory.
> > > > the piece price is based on the run
> > > > quantity. With the set up cost for each operation amortized into the
> > > > quantity being run.
> > > > Please send me your business address or your fax number and I'll
send you
> > > > a list of  the
> > > > available toroid sizes.
> > > > Thank you very much for your interest in our company.
> > > > Mark r. Pratt, V.P.
> > > >