Re: SRSG Question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-uswest-dot-net>

Hi Matt,

I use 1/2 inch drill chucks:

http://hot-streamer-dot-com/TeslaCoils/MyCoils/SmallCoil/small_gap1.jpg

They sell replacement chucks at any hardware store for $10 to $15.  Just
get the mating bolt to thread into it and your set.  Tighten them on super
hard with pliers and they will be rock solid.  My gaps are 1800 RPM.  It
may not be a good idea for the really fast 3600 RPM gaps especially if the
rotor is large.  A super easy solutions that has worked very well on my gaps.

Cheers,

	Terry

At 03:52 PM 5/5/2001 -0700, you wrote:
>Does anyone have any good ideas on how to attach the rotary disk (with the
>electrodes on it) to the motor? You can see what the disk and motor look
>like at http://www.carbonOS-dot-com/stuff.jpg . A disk boss (correct name?) was
>suggested, does anyone know where I can find one? Any other ways to do it?
>Any help is appreciated. Thanks.
>
>~Matt Segal
>Email - segal3-at-linkline-dot-com
>Webpage - http://www.carbonOS-dot-com
>
>---------------------------------------------------------------
>I know you believe that you understand what
>you think I said, but, I am not sure that you realize
>that what you heard is not what I meant.
>