[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Micro coil earthing



Original poster: "Jason Petrou by way of Terry Fritz <twftesla-at-uswest-dot-net>" <jasonp-at-btinternet-dot-com>

Gary,
The power was a 6W induction coil from a jeep. I ran it off a 16V AC
transformer. The coil is 4" high (windings) and 0.8" wide with 40SWG (43AWG)
wire on a very small PE vitamin tube. I think the voltage was only around
3KV but Im not exactly sure (i'd have to count the secondayr windings of the
coil). The resonance was about 600KHz

Jason
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, May 02, 2001 11:48 PM
Subject: RE: Micro coil earthing


> Original poster: "Lau, Gary by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<Gary.Lau-at-compaq-dot-com>
>
>
> >Matt im 16 and built 2TCs a normal 360W one and a really tiny mini
> >microscopically small 6W one. got any pics of your one?
> >
> >Jason
>
> 6 Watts?  Could you share a few more details?  What was the power supply
> and what were the spark-results?
>
> Gary Lau
> MA USA
>
>
>
>