Re: Aspirated Gap

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Gregory Hunter by way of Terry Fritz <twftesla-at-uswest-dot-net>" <ghunter31014-at-yahoo-dot-com>

Yeah, I've built a couple of them. I've run my big one
up to 4400VA. You can see one of them on my web site
at www.angelfire-dot-com/ga3/tesla

Gary Lau has built a couple of nice ones too. In fact,
I got the idea from him. I don't have the link handy,
but his site is on the web ring.

Contact me off list if you want to chat.

Cheers,

Greg

--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "by way of Terry Fritz
> <twftesla-at-uswest-dot-net>" <Mddeming-at-aol-dot-com>
> 
> Hi All! 
>         Does anyone have first-hand experience with
> an aspirated static gap. 
> This type uses two opposing hollow electrodes on a
> two-horned manifold, with 
> hot air and ozone, etc., being sucked in through the
> gap and vented outside 
> the building. I made one of 1/2" copper and plastic
> and was wondering if 
> there's anyone to compare notes with. 
> 
> Matt D.
> 
> 


__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail. 
http://personal.mail.yahoo-dot-com/