Re: fiberglass formers for sale

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Metlicka Marc by way of Terry Fritz <twftesla-at-uswest-dot-net>" <mystuffs-at-orwell-dot-net>

that $50 was supposed to be a $40, sorry, finger slop.

Tesla list wrote:
> 
> Original poster: "Metlicka Marc by way of Terry Fritz
<twftesla-at-uswest-dot-net>" <mystuffs-at-orwell-dot-net>
> 
> to all,
> i have decided to sell off the large inventory of fiberglass tanks that
> i have gathered.
> these tanks have been used bye a few list members and maybe they could
> comment with opinions of there suitability in secondary, or maybe
> magnifier driver form use?
> i have at this time (just some that i have measured):
> 10" x 46" winding area
> 8" x 32" winding area
> a few 16" x 28" winding area
> and some smaller 6", 4" and different lengths in all these sizes.
> these tanks are from a water softener company in the area and are domed
> at each end with a threaded hole in one. (rated 1100 psi)
> they ship easily through the usps with a not to high of cost in the
> states (not sure about over the pond, but i wouldn't think it would be
> to costly?). if a specific size is desired send requests and i will
> check, i will send pics on request.
> my asking price will be in the $30 to $50 range plus shipping with lower
> for smaller and such.
> any interested list members contact me and we will work out the details.
> thank you for your time,
> marc m.
> mystuffs-at-orwell-dot-net