Re: Cutting PVC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Robert Hughes by way of Terry Fritz <twftesla-at-uswest-dot-net>" <rfhughes-at-epix-dot-net>

Rather cheaply, you can co down to a hardware store and buy a pipe
Cutter for PVC, There pretty much self explanitory.(for the technicly
illiterate put the PVC pipe in between the plade and the bottmo of the
"clamp" tighten and rotate the cutter while holding the PVC tightly do
not let the pipe move adjust tightness as nessacary:-)


Mike H