Re: RSG Phase Adjustment

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "tesla by way of Terry Fritz <twftesla-at-uswest-dot-net>" <tesla-at-paradise-dot-net.nz>

I've used some small neon lamps with a diode is series as a strobe. Can
easily see sync operation and see phase variation with L/C resonant driver.
Its pretty broad as neons are on for a large part of the cycle, however
cheap and works
Best
Ted L in NZ
----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, March 08, 2001 6:05 PM
Subject: RSG Phase Adjustment


> Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<stanmoore-at-mindspring-dot-com>
>
> What is the process for finding the "sweet" spot when adjusting a SRSG
phase,
> and what role does this phase adjustment have in the overall tuning of a
TC?
>
> I have modified a 1/20 HP 1725 rpm motor to run at 1800 rpm.  I have four
> rotating electrodes on a G10 disk.  What does one look for when adjusting
> phase?  Is it something that can be done without test equipment?  Other
than
> say sight or sound?
>
> Thanks,
>
> Stan
>
>
>
>