Re: SRSG Question

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Matt Segal by way of Terry Fritz <twftesla-at-qwest-dot-net>" <segal3-at-linkline-dot-com>

I forgot about this answer until I was looking through my Grainger catalog
and came across the shaft arbor you were talking about. I ordered it, and it
works perfectly. Thanks.

~Matt Segal
Email - segal3-at-linkline-dot-com
Webpage - http://www.carbonOS-dot-com

---------------------------------------------------------------
I know you believe that you understand what
you think I said, but, I am not sure that you realize
that what you heard is not what I meant.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, May 06, 2001 9:31 AM
Subject: RE: SRSG Question


> Original poster: "Oxandale, Terry by way of Terry Fritz
<twftesla-at-uswest-dot-net>" <Toxandale-at-SPP-dot-org>
>
> WW Grainger sells an "arbor" that I have used many times. They are
> basically a sleeve with a threaded stud out one end. The sleeve fits
> over the shaft and the disc slips onto the stud between two special
> washers. If the disc is true, then there will be no run-out with this.
> It works surprisingly well for as simple as it is. It has set screws to
> hold it onto the shaft, and the threaded portion comes in left and right
> hand threads, and my 5/8" to 1/2" SAE size cost about $8.
>
> (Un)Terry
>
> -----Original Message-----
> From: Tesla list [mailto:tesla-at-pupman-dot-com]
> Sent: Saturday, May 05, 2001 6:55 PM
> To: tesla-at-pupman-dot-com
> Subject: SRSG Question
>
>
> Original poster: "Matt Segal by way of Terry Fritz
> <twftesla-at-uswest-dot-net>" <segal3-at-linkline-dot-com>
>
> Does anyone have any good ideas on how to attach the rotary disk (with
> the
> electrodes on it) to the motor? You can see what the disk and motor look
> like at http://www.carbonOS-dot-com/stuff.jpg . A disk boss (correct name?)
> was
> suggested, does anyone know where I can find one? Any other ways to do
> it?
> Any help is appreciated. Thanks.
>
> ~Matt Segal
> Email - segal3-at-linkline-dot-com
> Webpage - http://www.carbonOS-dot-com
>
> ---------------------------------------------------------------
> I know you believe that you understand what
> you think I said, but, I am not sure that you realize
> that what you heard is not what I meant.
>
>
>
>
>