Re: THOR's strike rail: how to?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Marco Denicolai by way of Terry Fritz <twftesla-at-qwest-dot-net>" <marco.denicolai-at-tellabs-dot-com>

Hello,

Thanks to all those that helped with this. I'll try first with Joe &
Terry idea below, with the aid of a bump on the toroid too. I'll first
check with Etesla the approximate field distribution.

Regards

Tesla list wrote:
> 
> Original poster: "Joseph M. Geiss by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <joseph20-at-home-dot-com>
> 
> Correct me if I am wrong but all a strike ring is, is a grounded
> partial-circle of conductor above the
> primary. Why could you not put another ring half the distance from the edge
> of the primary and the wall
> of the secodary so you now have a strike ring running above the middle of
> the primary?
> 
> Joe
-- 
_____________________________________________________________

 Marco Denicolai           Senior Design Engineer 
 Tellabs Oy                tel: +358 9 4131 2769
 DSL Products              mobile: +358 50 353 9468
 Sinikalliontie 7          fax: +358 9 4131 2410
 02630 Espoo  FINLAND      email: marco.denicolai-at-tellabs-dot-com
_____________________________________________________________