Re: ABS Coil Form

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <FutureT-at-aol-dot-com>

In a message dated 6/11/01 7:43:41 PM Eastern Daylight Time, tesla-at-pupman-dot-com 
writes:

> Anyone know why ABS pipe wouldn't be a better coil form than PVC? I've
>  heard it does not retain water like PVC... that'd reduce loss. Less loss
>  == better power transmission. That's a good thing.
>  -Jon

Jon,

ABS probably is much better, but the black colored type may have
bad conductive carbon in it in some cases.  Form losses tend to
be mostly insignificant though.

John Freau