Re: Terry's NST protection circuit? ~

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Johnathon,

For a 12/60 NST, I would leave those values the same.  If one had a much lower
powered coil, then maybe go to lower wattage resistors.  The capacitance value
is about 550pF per leg which is just right for most NST systems.  One could
probably go from the range of 400 to 800pF without much effect.

Cheers,

        Terry

At 01:51 PM 6/8/2001 -0400, you wrote: 
>
> Can I customize the Resistors and Caps as well? 
>
> --------------------------------------- 
> Jonathon Reinhart 
> hometown.aol-dot-com/kidd6488/tesla