[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Triggered gap and safety gaps

To: tesla-at-pupman-dot-com
Subject: Re: Triggered gap and safety gaps
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Mon, 30 Jul 2001 18:41:38 -0600
Resent-Date: Mon, 30 Jul 2001 18:43:23 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <rqsmJC.A.KjD.o8fZ7-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <CHURCHMON-at-aol-dot-com>

Hi list and Mark 
With all the talk of Triggered gaps is there a circuit conf.(schematic)which 
everyone is going with? The reason I ask is I have bunch of run caps with 
values raging from 
10uf. to 50uf. a 500watt dimmer  and a Accell Super coil to work with.I just 
don't want 
to blow something up 

Thanks, Mike Church

Prev by Date: Re: sec input impedance
Next by Date: RE: Triggered gap and safety gaps
Prev by thread: Re: Triggered gap and safety gaps
Next by thread: RE: Triggered gap and safety gaps
Index(es):
- Date
- Thread