[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

3 Questions



Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <A123X-at-aol-dot-com>

# 1. Well I looked at my 280v/20amp variac for a while before I realized how 
to hook it up. I'm pretty sure I have it figured out right but could you guys 
look at the drawings and text I made and tell me if I'm right, 
http://www.geocities-dot-com/crazystuff123/tesla.html 

# 2. Does any one here know whether the motors from the fans inside microwave 
ovens can be made sync? All of the ones I've seen have a square core, 
windings on one side, then on the other there is a hole drilled in the core 
with the armature in it. I was thinking of trying to make a very high 
efficiency low power coil(like 50 watts because it would supposedly be able 
to give 12" sparks) and thought that those motors would be good for a mini 
sized rotary gap. 

# 3. Is it possible to hook 3 or more identical Tesla Coils in series? Twins 
are kinda like two TC's hooked in series but what about three in series 
connecting the top of one to the base of another? Just wondering. 

Mark