triggered gap

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Alex Madsen by way of Terry Fritz <twftesla-at-qwest-dot-net>" <alexmadsen-at-yahoo-dot-com>

Excuse my ignorance but what is a triggered gap? a URL to an explanatory web
site would be fine.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, July 24, 2001 3:11 PM
Subject: Re: TC Final Plans


> Original poster: "Metlicka Marc by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <mystuffs-at-orwell-dot-net>
>
> cj,
> you might strongly consider using a triggered gap for your new coil.
> it has very little parts, is very easy to build and it works better then
> any other gap yet conceived.
> the phase relationship can be adjusted to match any coils "sweet spot"
> and as i have been trying to show, if a vacuum or blower is used it will
> first notch quench every coil giving the ultimate in performance out of
> any design. once you try one, you will see why i say that rotaries are
> not only a waste of time, money and unsafe, but they are obsolete.
> just a suggestion but i strongly recommend it.
> marc m.
>
>


_________________________________________________________
Do You Yahoo!?
Get your free -at-yahoo-dot-com address at http://mail.yahoo-dot-com