Re: terry's protection filter

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <twftesla-at-qwest-dot-net>

Hi Robert,

I would go to 4 or 5 MOVs per leg.  All else can stay the same but reset
the safety gaps too.

http://hot-streamer-dot-com/TeslaCoils/MyCoils/SmallCoil/small_protection.jpg

Cheers,

	Terry

At 08:24 AM 7/23/2001 -0500, you wrote:
>terry, list,
>I am switching to running my coil on a 9kv 150ma nst bank instead of my
>previous, dinky little 15/30 nst (thanks trent). I didn't build a filter
>for the original one, but I did print out a copy of the filter. I
>noticed that it is for 15 kv, not for 9, so I thought I should use less
>MOV's since I have less voltage but what about the capacitors and the
>power resistors? can I get by without making modifications? thanks for
>the help,
>Robert
>