Re: SRSG disk material

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" <Parpp807-at-aol-dot-com>

In a message dated 1/14/01 1:44:36 PM Central Standard Time, tesla-at-pupman-dot-com 
writes:

<< an adjustable circle-cutter (be careful with this
 thing!!!)  >>

AKA  FLY CUTTER. Yes, do be very careful. Don't try to hold onto whatever you 
are cutting.
Clamping the work to a smooth and level surface will save much pain and even 
blood.
Also, remember to change the position of the cutter so the bevel is on the 
outside.
You want the disc, not the hole. I have used the fly cutter many times on 
many different
materials. Is is a very dangerous tool.

Happy day,
Ralph Zekelman