[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: depotting NST vs. LTR (static gap)

To: tesla-at-pupman-dot-com
Subject: Re: depotting NST vs. LTR (static gap)
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 09 Jan 2001 13:05:44 -0700
Resent-Date: Tue, 9 Jan 2001 13:12:00 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <Zij67B.A.8EH.IC3W6-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" <biomed-at-miseri.winnipeg.mb.ca>

Hello,   I'm new to this list and I have as NST that I need to depot,  what
temperature did you use to melt the tar  and what is an LTR.  The
transformer I have is a Jefferson Electric  , Magnetek 15kv, 60mA

Thanks for the info in advance and I hope I've walked into this thread an
ok way!

Shaun Epp
VE4SCE

Prev by Date: Re: Conical primary formula questions.
Next by Date: how to: measuring the resonance frequency in the primary/ secondary circuit
Prev by thread: Re: depotting NST vs. LTR (static gap)
Next by thread: RE: depotting NST vs. LTR (static gap)
Index(es):
- Date
- Thread