[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How to prvent secondary to ground arcs.



Original poster: "Jason by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jasonp-at-btinternet-dot-com>

reduce the coupling. raise the secondary coil up above the primary until it
stops

Best Regards,
Jason

--------------------------------------------
Geek #1139 G-1 - www.thegeekgroup-dot-org
"Because the Geek will inherit the Earth!!!"
--------------------------------------------
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, December 30, 2001 6:44 PM
Subject: How to prvent secondary to ground arcs.


> Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<MrGizmo28-at-aol-dot-com>
>
>  My seconday sprarks from the toroid, travels down the length of the coil
and
> connects with ground, white loud streamers. Any way to minimise this?
>
>