[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Revised trigger gap schematic



Original poster: "Ted Rosenberg by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Ted.Rosenberg-at-radioshack-dot-com>

Hello all:

I finally sent the revised PDF so Terry could, and did, post it on the
server.
The resistors are now shown as they should be, in the schematic on Page 7.
Apparently, according to Marc, they are needed. See his latest reply to Ed.

Anyway, the PDF is at
http://hot-streamer-dot-com/temp/tgap.pdf

Remember, I'm just the construction guy, not the theoretician.  :))

Safety First

Ted