[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Bleeders on PFC caps

To: tesla-at-pupman-dot-com
Subject: Bleeders on PFC caps
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 18 Dec 2001 16:33:40 -0700
Resent-Date: Tue, 18 Dec 2001 16:42:38 -0700
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <rqc4oD.A.IvB.BR9H8-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Jonathan Peakall by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jpeakall-at-mcn-dot-org>

Howdy All,
 
I have a total of 330uf PFC in 6 capacitors. What would be a good value for
some bleeder caps? I know the NST should drain them, but I may use the power
supply for other things. Which reminds me, if I use the PSU for other stuff,
and I accidentally leave the PFC in the circuit (the PFC is switchable) would
it have an ill effect on most devices?
 
Thanks All,
 
Jonathan Peakall

Prev by Date: Re: MOT charging reactor PS
Next by Date: winding length
Prev by thread: Re: Streamer Behavior
Next by thread: Re: Bleeders on PFC caps
Index(es):
- Date
- Thread