International Editions of Programs/Web Sites

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Rscopper-at-aol-dot-com>

International list members, 

To help all the programmers on the list that want to make their programs
global, and those coilers that don't speak english very well, please translate
the following text into your native language and post on the list.  

If anyone wants to try and translate the safety information found on
www.pupman-dot-com, that would also be helpful. 


English 

New features 
Bug Fixes: 
Default design parameters 
DISCLAIMER: 
Primary Transformer 
Output Voltage 
Rated Current 
Input Frequency 
Capacitor Match 
Recommended Power Factor Correction Capacitor 
Input Voltage 
Diameter of toroid tube. 
Diameter of toroid ( tube center to tube center).   
Shape of Top Capacitor 
Toroid 
Sphere 
Total Diameter 
Spacing 
Total Turns 
Inductance 
Frequency 
Inside Diameter 
Wire 
Required C 
Total 
Primary Coil 
Secondary Coil 
Radius 
Length of wire 
Average 
Coil Configuration 
Angle From Horizontal Plane 
Wire Gauge 
Circumference 
H/D Aspect 
Height to diameter aspect ratio 
Self Capacitance 
Top Load C 
Design Parameters 
Scratch Pad 
Percent 
For A PFC Rating Of 
Break Rate 
Number of Gaps 
Each Gap Width 
Trigger Voltage 
Single Gap 
Maximum Spark Output (based on 1.2*sqrt(power-in)): 
Use Bert Pool Equation 
Use Mark Rzeszotarski Equation 
Capacitance 
 From Australian Journal of Physics 
Tesla Coil Design 
primary coil winding 
Trans/Cap Match 
Reference 
Spark Gap 
Power Output 
+ any other coil terminology you can think of that I've missed. 

Thanks in advance, 

R. Scott Coppersmith