Re: I Think I Messed up!

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Brian by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ka1bbg-at-webryders-dot-net>

Hi, well adding a couple more turns is a possibility. now if you add more
capacitance to the mmc then you will tune into less primary turns. more top
load will tend to tune outward more turns. cul brian f.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, December 03, 2001 1:31 PM
Subject: I Think I Messed up!


> Original poster: "Patrick Leonard by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <transactoid-at-rogers-dot-com>
>
> My primary consists of just under 15 turns of 1/4" copper pipe spaced 1/4"
> apart. My secondary is 4" x 28" wound with 28 guage wire. I just ran
QuickTC
> and it indicates the tap point would be turn 18!!! I didn't design for
this at
> all!
>
> Do I have any recourse?? I really *cannot* scrap my primary and rebuild!
>
> Please give me some words of re-assurance.
>
> Thanks,
> Patrick
>
>
>
>