RE: Smooth coatings on the secondary

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Lau, Gary by way of Terry Fritz <twftesla-at-uswest-dot-net>" <Gary.Lau-at-compaq-dot-com>

I have a photo of the jig I used on my site at
http://people.ne.mediaone-dot-net/lau/tesla/secondary.htm

Nothing fancy or complicated, just a VSR drill controlled by a variac.

Gary Lau
MA, USA


Original poster: "will dork by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<vcdmasta-at-hotmail-dot-com>


Hello everyone,

I was just wondering if someone could suggest a good design for a
winding
machine, as my last secondaries were wound by hand. I would like next
time to
be able to do this in a much more timely manner as well as being able to
coat
my secondaries on the unit (what i really want) I was just wondering if
anyone
has a photo of their unit that they could show me. I dont want the unit
to be
very complicated, but i want it to work well and be motorized. 

 

Thanks

Will McManus