[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Vacumm Pups Source

To: tesla-at-pupman-dot-com
Subject: Vacumm Pups Source
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sun, 22 Apr 2001 21:15:54 -0600
Resent-Date: Sun, 22 Apr 2001 21:16:11 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <zXs33.A.2gD.w5546-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "tesla by way of Terry Fritz <twftesla-at-uswest-dot-net>" <tesla-at-paradise-dot-net.nz>

Team

>From time to time some have commented on the need for a vacuum pump to help
remove air from caps and the like.
I used (before I discovered the MMC) cheap water venturi effect vacuum
pumps. About $19NZ from lab supply warehouse.

Worked very well to remove air from rolled poly cap. BTW bungs and tubing
from the home brew world)

Best
Ted Linney in NZ

Prev by Date: Re: Effective application of flat aluminum tape to double curvedsurfaces?
Next by Date: Re: Can anybody ID these caps?
Prev by thread: Re: Effective application of flat aluminum tape to double curvedsurfaces?
Next by thread: Re: Vacumm Pups Source
Index(es):
- Date
- Thread