RE: Spacing??? Too much?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "ebyng by way of Terry Fritz <twftesla-at-uswest-dot-net>" <ebyng-at-netlimit-dot-com>

Hmmm, maybe a bigger transformer??

The idea is that it'll be able to accept a wide variety of capacitors and
transformers..

I think Ill reduce that spacing a bit, though...

thanks
Erik
----------------------------------------------
Original Message
From: "Tesla list"<tesla-at-pupman-dot-com>
Subject: RE: Spacing??? Too much?
Date: Wed, 11 Apr 2001 16:06:33 -0600

>Original poster: "Basura, Brian by way of Terry Fritz
<twftesla-at-uswest-dot-net>" <brian.basura-at-unistudios-dot-com>
>
>My first thought is the coil is way oversized for the power supply you are
>proposing to use...
>
>Regards,
>Brian B.
>
> -----Original Message-----
>From: 	Tesla list [mailto:tesla-at-pupman-dot-com] 
>Sent:	Wednesday, April 11, 2001 6:59 AM
>To:	tesla-at-pupman-dot-com
>Subject:	Spacing??? Too much?
>
>Original poster: "ebyng by way of Terry Fritz <twftesla-at-uswest-dot-net>"
><ebyng-at-netlimit-dot-com>
>
>Designing another coil (#4) :-)
>
>Do you think that , with a 7" secondary, 22awg magnet wire, 28" long, and a
>20 turn, .25in refrigerator tubing primary, that a gap of 3' inches between
>the primary and the secondary is too much??  How about .50 inches spacing
>between primary turns????
>
>The thing will only be running a 9kV/30mA NST...
>
>???? Whadda ya'll think????
>
>thanks
>Erik
>
>_____________________________________________
>Free email with personality! Over 200 domains!
>http://www.MyOwnEmail-dot-com
>
>
>
>
>

_____________________________________________
Free email with personality! Over 200 domains!
http://www.MyOwnEmail-dot-com