[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Bi-Polar coil design



All,

The web page Justin references is at 

http://fp2.hughes-dot-net/brianb/newpage12.htm
<http://fp2.hughes-dot-net/brianb/newpage12.htm> 

Regards,
Brian B.

		-----Original Message-----
		From:	Tesla list [mailto:tesla-at-pupman-dot-com]
		Sent:	Wednesday, November 01, 2000 7:46 PM
		To:	tesla-at-pupman-dot-com
		Subject:	Re: Bi-Polar coil design

		Original poster: Pyrotrons-at-aol-dot-com 

		Hi Terry.

		I have some experience with a small (270VA) twin coil. I used the schematic 
		shown on Brian Basura's website....and it worked great. It's the schem.
where 
		the capacitor is in between each primary coil, and the spark gap is in 
		parallel with this arrangement. (and the trannie is across the spark gap of 
		course)

		<snip>

		Justin Hays
		KC5PNP
		Email: pyrotrons-at-aol-dot-com
		Webpage: www.hvguy-dot-com