RE: Blowing MMC bleed resistors...

["Ted Rosenberg" <Ted.Rosenberg-at-xxxxxxxxxxxxxx> (by way of Terry Fritz <twftesla-at-xxxxxxxxxx>)]

Garry:
The Cat. No. for the 10M ohm, 1/2w. 5% carbon film resistors I used is
900-0474. They are 9 cents each in 1-9 but drop to 1 cent in 100 piece qty.
If you call the 800 843-7422 option 2....order line, they can help you.

regards

Ted
---------------------
Original poster: "Garry Freemyer" <Garry-at-NDFC-dot-com> 

I found carbon film resisters but not just "Carbon" resistors. Voltage rated
was 250 I think thats not what you are using.

do you have a catalog number?

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Wednesday, November 01, 2000 2:42 PM
To: tesla-at-pupman-dot-com
Subject: RE: Blowing MMC bleed resistors...


Original poster: "Ted Rosenberg" <Ted.Rosenberg-at-radioshack-dot-com> 

Garry, Terry:
yes, I used 10Mohm, 1/2W carbon resistors in my MMC. You can see them in the
photo at http://www.flash-dot-net/~ford29/tesla/mmc01.jpg

But while RadioShack items, they did not come from the catalog. Instead I
ordered them on line using radioshack-dot-com. Once there, find the value/watts
and type in the quantity (100 in my case) and the dumb high price per piece
drops to 1 cent each.