[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Blowing MMC bleed resistors...



Hi Garry,

	They need to be 10,000,000 ohms instead of 10,000.  I think Ted uses Radio
Shack resitors in his MMC but I didn't see the 10Meg ones in thier catalog.
 If the resitors are a problem, I can always order a bunch for people.
They are esay to send and cheap...

Cheers,

	Terry


At 11:09 AM 11/1/2000 -0800, you wrote:
>>Sounds like you're using the wrong type of resistor. 1/2 W carbon-film
>resistors typically are only rated to 200-300V. Metal-glaze resistors
>are designed for much higher voltages. 
>
>Oh Oh! Does this mean I cannot just go to radio shack and buy half watt
>10,000 ohm resisters for the upcoming MMC and I must mail order them? 
>