Re: toroid sizing

• To: tesla-at-pupman-dot-com
• Subject: Re: toroid sizing
• From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 30 Mar 2000 20:35:03 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi Matt,
            Post the capacitance of your primary cap (again if you 
have already) and we'll sort something out for you.

Regards,
Malcolm


> Original Poster: Fucian-at-aol-dot-com 
> 
> Hi all,my coil is 3ich by 15inch wound with 24awg.the frequency is like 
> 475khz.im using a 9kv30ma the primary is 11 turns of copper tubing.my
current 
> toroid is 4inch diam.by about 15 inches long still in compressed form.i cant 
> get any streamers!i evenswitched over to a 15kv30ma and retuned.still no 
> diff.how do i get streamers?should i try and return it and get 2 small
mixing 
> bowls for the coil,or should i cut the ducting to a smaller lenght?key word 
> here is cutting,once cut,no refund! i have very little time left to work on 
> it.what am i to do?
> 
> 

• Prev: Re: toroid sizing
• Next: Re: Jefferson Electronics Transformer - Is it of use in TC?
• Index(es):
  • Main
  • Thread