[Prev][Next][Index][Thread]

Re: toroid sizing



Hi Matt,

	I got some and ask the same question.  The non-metallic is a super thin
(like millionths of an inch) coating of metal on plastic.  The hot streamer
will burn through the thin metal coating and could set the thing on fire.
Only the real aluminum duct should be used.

Cheers,

	Terry


At 08:16 PM 03/30/2000 -0500, you wrote:
>ok,this might sound dumb,but can i use the non-metallic type ducting for a 
>toroid?i ask this cuz ive seen many toroids that look like they have the 
>non-matalic type.
>
>matt
>