[Prev][Next][Index][Thread]

Re: IGNITION COIL POWERED TESLA



No problem at all with this idea. I actually run several small TCs using
flyback transformers, the principal is not really any different.
As to diodes, don't rely on a single device, a string of diodes in series is
what you want.Make sure they are all of the same type. Build in a good
safety margin, on a 10kV output flyback circuit, I use ten 1500V 2A diodes.
Don't bother with equalising resistors, modern diodes don't need them.
Connect your primary capacitor between the output of the diode string and
the ground of the coil (make sure you have a safety gap across the
capacitor).
Now carry on as if you were using an NST or OBIT, with the spark gap and
primary coil etc.
Steve
----- Original Message -----
From: Tesla List <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, March 16, 2000 11:32 PM
Subject: IGNITION COIL POWERED TESLA


> Original Poster: Fucian-at-aol-dot-com
>
> HAS ANYBODY EVER TRIED TO USE AN IGNITION COIL TO POWER A SMALL TESLA?I
GUESS
> IT WOULD BE GRATE FOR A DC COIL WOULDNT IT?HOW WOULD I RECTIFY THE AC TO
DC
> USING A STANDARD IGNITION COIL?COULD I JUST PLACE A DIODE ON THE
OUTPUT?ANY
> COMMENTS WELCOME--MATT
>
>
>