Re: Avalon.....dooohh

• To: tesla-at-pupman-dot-com
• Subject: Re: Avalon.....dooohh
• From: Hollmike-at-aol-dot-com (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 15 Mar 2000 06:59:20 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

In a message dated 3/14/2000 11:22:07 PM Mountain Standard Time, 
tesla-at-pupman-dot-com writes:

> How poor is "poor"?  I made my RSG using an aluminum ring to connect the
>  electrodes.  I haven't used it yet, and it's not too late to make it out of
>  copper, but I'd rather not go through the trouble of machining a balanced 
> ring
>  again it I don't have to.
>  
>  Mark
>  
I would use it, since you have already made it.  I have seen a coil with an 
aluminum primary that worked quite well(at leat 96 inch streamers).  I may do 
better with copper, but I don't see why you can't use your setup.  
Mike

• Prev: Re: variac
• Next: RE: Dramatic Performance Drop After 5 Seconds?
• Index(es):
  • Main
  • Thread