RE: NST insulations

• To: tesla-at-pupman-dot-com
• Subject: RE: NST insulations
• From: "Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Fri, 10 Mar 2000 11:48:22 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

> Original Poster: "Ed Phillips" <evp-at-pacbell-dot-net> 

<snip>

>	Only trouble is that the stuff shrinks a lot when it cools, and also
>tends to have a lot of voids in it.  I've tried to do something better,
>such as cooling it very slowly and addint more material to fill in the
>hole which forms on top, but never solved the problem of the voids. 
>Good, messy old hot tar is much better.

>Ed

Actually, HV oil is the best and usually the cheapest solution. It's hard to
beat the real stuff at $22.00/5-gallons (Shell Diala-AX). 

Brian B.

• Prev: RE: copper static SG problems
• Next: Re: copper static SG problems
• Index(es):
  • Main
  • Thread